manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 480 / 888

Share
Download
Bay Networks 5390 Administering Download Page 480

A15-60

893-741-B

Using Model 5390 Security

Integrating SecurID into ACP

Integrating the ACE/Server software into ACP requires changes to the erpcd utility. The following 
instructions assume that the ACE/Server software is installed in a directory called /usr/ace and the 
Annex software is installed in /usr/annex; if your code is installed in different directories, substitute 
the appropriate pathnames where applicable. 

1

As a superuser, change to the /usr/annex/src directory:

# cd /usr/annex/src

2

Create a directory called sdclient:

# mkdir sdclient

3

Copy the required header files and libraries from the 
ACE/Server directories:

If you have ACE/Server Release 1.1:

# cp /usr/ace/sdclient.a sdclient
# cp /usr/ace/sdconf.o sdclient
# cp /usr/ace/<your_host_type>/*.h sdclient

If you have ACE/Server Release 1.2:

# cp /usr/ace/sdiclient.a sdiclient
# cp /usr/ace/<your_host_type>/*.h sdiclient

4

Edit the erpcd/Makefile file:

NOTE: 

These instructions assume that the software is installed on a 

UNIX system and that the host tools have been compiled (as opposed to 
using the binaries from the Annex software distribution tape). Also, the 
target UNIX system requires a development environment (C compiler, 
libraries, etc.). Make sure the host clock is set correctly.

NOTE: 

This sequence requires that these files are installed on the 

slave/client system from the ACE/Server host.

NOTE: 

Make sure the /var/ace/sdconf.rec file is installed on the system 

that is running erpcd.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments