manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 182 / 888

Share
Download
Bay Networks 5390 Administering Download Page 182

A8-14

893-741-B

Point-to-Point Protocol (PPP)

•

The value set for ppp_acm (a 32-bit integer) is read in as 
the ACCM.

•

If input_flow_control is set to start/stop, the following two additions are made:

If input_start_char is 0–31 decimal, the bit indexed by this parameter is set in the ACCM.

If input_stop_char is 0–31 decimal, the bit indexed by this parameter is set in the ACCM.

•

If output_flow_control is set to start/stop, the following two additions are made:

If output_start_char is 0–31 decimal, the bit indexed by this parameter is set in the ACCM.

If output_stop_char is 0–31 decimal, the bit indexed by this parameter is set in the ACCM.

For example, the initial ACCM sent to the peer is 0x000A0001 if ppp_acm is set to 0x00000001 
(that is, the ASCII NUL character will not be sent) and the following parameters are set as indicated:

input_flow_control start/stop
input_start_char ^S
input_stop_char ^Q
output_flow_controlstart/stop
output_start_char f
output_stop_char h

NOTE: 

Since the output flow control parameters are outside the range 

0–31 decimal, they do not affect the ACCM. The na/admin command 
show port ppp_acm still displays the ppp_acm setting. The CLI com-
mand netstat –ipnn, where nn is the port number, displays the true mask 
(ACCM) value, that is, the value negotiated between the two PPP pro-
cesses.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments