manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 217 / 888

Share
Download
Bay Networks 5390 Administering Download Page 217

893-741-B

A9-31

Internetwork Packet Exchange (IPX) Protocol

The netstat -x command display looks like this:

annex: netstat –x
There are 2 NICs, 3 RIPs, and 4 SAPs

Using the netstat -x Command

Issuing the netstat -x ? command displays information about the use of netstat x, as follows:

annex: netstat -x?

Usage: netstat -x 

-xi 
-xm
-xr [network]
-xs [server_name]
-xS [server_name]

IPX Network Interfaces

Issuing the netstat -xi command displays information about the Model 5390 servers currently in 
use for dial-in or LAN-to-LAN routing. The following is a sample display.

The field headings in the above display indicate the following:

•

Name is the interface name of the corresponding IPX port over which IPX dial-in or routing is 
currently occurring.

•

Network is the number of the network to which interface Name connects.

•

Tics indicate the amount of time associated with the cost of using interface Name. A tic is 
approximately 55 milliseconds.

•

The CO field is not used.

•

NB indicates whether or not this interface propagates NETBIOS information.

•

SO indicates whether or not this interface propagates server information only.

•

Ipkts is the number of IPX packets received on this interface.

•

Ierrs is the number of incoming IPX packets that contained errors.

Name

Network

Tics

C0

NB

S0

Ipkts

Ierrs 0pkts

0errs Collis

en0

00001234

2

n

y

n

21592

0

201380

0

0

asy18

00003456

4

n

y

n

72

0

98

0

0

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments