manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 533 / 888

Share
Download
Bay Networks 5390 Administering Download Page 533

893-741-B

B1-25

Network Administration

Including the call-back message, the new messages generated by ACP while processing ARA logins 
are:

•

login

User is authenticated and session is started.

•

logout

Session exited via user hang-up, time-out, or administrator reset.

•

reject

Authentication failed.

New log messages are generated by the acp_userinfo file parser if an error is detected when 
processing the acp_userinfo file (see Using include Files in the acp_userinfo File on page A15-25 
for more details).

The demand dial and modem code include debug level syslog information that provides progress, 
status, and failure information. This information appears in the following format:

Apr 2 1:53:42 annex.site.com ppp[323]: asy15 configuring dynamic dial interface
Apr 2 1:54:06 annex.site.com ppp[323]: asy15 type_of_modem is "Optima96"
Apr 2 1:54:06 annex.site.com ppp[323]: asy15 use cli modem command to verify modem 
information for "Optima96"
Apr 2 1:54:06 annex.site.com ppp[323]: asy15 attempting to activate dynamic 
dial interface
Apr 2 1:54:06 annex.site.com ppp[323]: asy15 sending reset string "ATZ"
Apr 2 1:55:36 annex.site.com ppp[323]: asy15 send/expect timed out 
(numeric result codes expected)
Apr 2 1:55:36 annex.site.com ppp[323]: asy15 sending reset string "ATZ"

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments