manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 126 / 888

Share
Download
Bay Networks 5390 Administering Download Page 126

A4-20

893-741-B

The Port Server and Rotaries

CBAUD

The given baud rate is used to set the Model 5390 
port baud rate. If the setting is read from the 
Model 5390 server and there is no equivalent 
POSIX speed, B50 is returned. Note that split 
baud rates are not supported.

CSIZE

All character sizes (number of bits per character) 
are supported.

CSTOPB

Both 1 and 2 stop bits are supported. If this value 
is read from the Model 5390 server, and the 
Model 5390 server is set to 1.5 stop bits, this value 
is returned as 1 stop bit.

CREAD

Fully implemented.

PARENB/PARODD

Odd, even, and no parity are implemented. If the 
settings are read from the Model 5390 server, and 
there is no equivalent POSIX setting, the setting is 
returned as no parity.

HUPCL

When set, the DTR line is dropped on close.

CLOCAL

When set, the Model 5390 server will not respond 
to modem control changes on this line.

Table A4-1.

POSIX termios Field Definitions for TSTTY (continued)

Field

Description

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments