manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 63 / 888

Share
Download
Bay Networks 5390 Administering Download Page 63

893-741-B

A2-3

Configuring the Model 5390 Server

3

Execute the set annex command to change parameters. 

The following sample command lines:

•

Enable the DNS name server.

•

Define two name server hosts.

•

Enable security on the Model 5390 server.

•

Define a security server host.

•

Enable security for virtual CLI connections.

•

Define an administrative password.

•

Enable event logging.

•

Define a CLI prompt.

command:

set annex name_server_1 dns pref_name1_addr

command:

192.9.200.95 pref_name2_addr 192.9.200.85 

command:

enable_security Y vcli_security Y

command:

pref_secure1_host 192.9.200.95

command:

password piano syslog_mask all

command:

syslog_host 192.9.200.95 cli_prompt "%a%c"

4

Execute the show annex all command to review your changes.

Using the example in step 3, the terminal displays:

command: show annex all

Annex Generic Parameters

inet_addr:132.245.44.187

subnet_mask:255.255.255.0

pref_load_addr:132.245.44.80

pref_dump_addr:132.245.33.8 

load_broadcast:N 

                  broadcast_addr:132.245.44.255 

load_dump_gateway:132.245.44.22

load_dump_sequence: net              

image_name: "oper.46.I9336" 

motd_file: "motd"           config_file: 

"config.annex"

authoritative_agent: Y                

routed: Y 

server_capability: none             

disabled_modules: vci   

tftp_load_dir: ""               

tftp_dump_name: "" 

ipencap_type: ethernet ip_forward_broadcast: N

tcp_keepalive: 120              option_key: "OHCg0C52T"session_limit: 1152             

output_ttl: 64 

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments