manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 161 / 888

Share
Download
Bay Networks 5390 Administering Download Page 161

893-741-B

A7-9

Serial Line Internet Protocol (SLIP)

Configuring SLIP for a Host

•

Set the mode parameter to slip, cli, adaptive, auto_detect, or auto_adapt (see Port Mode on 
page A3-5), with the following restrictions.

•

If you are dialing in with a SLIP line, you can only set the mode to slip.

•

If you set the mode to cli mode, adaptive, auto_detect, or auto_adapt, you may have to 
press Return at the time you are connected. This puts you in cli mode. You must then 
issue the CLI slip command to convert the port to slip mode. The Model 5390 server does 
not detect SLIP.

•

Setting the type parameter to hardwired registers the user with the who database according 
to the input_is_activity and output_is_activity parameter settings. If neither parameter is 
set, any user on this port is invisible to who. 

If the input_is_activity parameter is set, when the user enters data, the line is registered with 
the who database (generally used for hardwired CLI terminals). 

If the output_is_activity parameter is set, the line is registered when the Model 5390 server 
first sends data (generally used for hardwired printers or other slave devices). This entry is 
removed on a hang-up or when the slave line is released, regardless of the input_is_activity 
and output_is_activity parameter settings. 

•

Set the speed parameter to the rate required for the SLIP link. Set the remote end to match 
this value. You cannot set the speed parameter to autobaud if the mode parameter is set to 
slip.

•

To configure the port for EIA flow control, set the control_lines parameter to flow_control 
and the input_flow_control and the output_flow_control parameters to eia. Do not set these 
parameter to start/stop.

•

Use the supplied defaults for the data_bits (8), stop_bits (1), and parity (none) parameters. 

NOTE: 

SLIP is an 8-bit protocol. If data_bits is set to 7, and parity is 

not set to none, the Model 5390 server forces the data_bits setting to 8 
and the parity setting to none. Otherwise, the Model 5390 server gener-
ates an error message for the port.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments