manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 279 / 888

Share
Download
Bay Networks 5390 Administering Download Page 279

893-741-B

A12-21

Internet Protocol (IP) Routing

Enabling and Disabling Passive RIP

The Model 5390 parameter routed must be set to Y (the default) to enable any type of routing other 
than static routes. Use na, admin, or SNMP to make sure the setting has not been changed to N. If 
it has been changed, reset it to Y, and reboot the Model 5390 server (the following example uses 
admin):

annex: 

su

Password:
annex# admin
Annex administration Remote Annex 10.1, 24 ports
admin: show annex routed

routed: N

admin: set annex routed Y

You may need to reset the appropriate port, Annex
subsystem or reboot the Annex for changes to take
effect

admin: q
annex# boot

rip_sub_accept

Controls whether or not subnet routes are accepted in 
updates.

rip_sub_advertise

Controls whether or not RIP advertises subnets. 
Available with active RIP only.

Table A12-3. Interface Parameter Settings (continued)

Parameter

Description

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments