manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 619 / 888

Share
Download
Bay Networks 5390 Administering Download Page 619

893-741-B

C2-13

Configuration Parameters

returning to local mode. When defining this value, use a unique, unused character (such as Control 
B) or a string of characters. To clear an existing setting, enter a null string (""). The default is no 
control character sequence.

On virtual (telnet) ports, the backward_key value is limited to one printable or Control character. 
If the user tries to set this value to more than one character, that is, a string, the setting is ignored 
and the previous value is restored.

On non-virtual ports, a backward_key string can range from 1 to 16 characters.

banner

This asynchronous port parameter controls whether or not the Model 5390 banner and 
message-of-the-day display on CLI ports. 
A Y enables this parameter, an N disables it. The default is Y.

broadcast_addr

This Model 5390 parameter defines the IP address for Model 5390 broadcasts. It is recommended 
that you set a subnet broadcast address, if possible. In this case, you set the subnet portion of the 
broadcast address to match the Model 5390 subnet address, as determined by the Model  5390 subnet 
mask, and you set the host portion of the broadcast address to all one-bits. For example, if the Model 
5390 subnet address is 132.254.9.0, and the Model 5390 subnet mask is 255.255.255.252, you 
should set the broadcast address to 132.254.9.3. To calculate this, subtract the subnet mask from 
255.255.255.255. Thus, in the previous example, you subtract 255.255.255.252 from 
255.255.255.255 to arrive at 0.0.0.3. 

If your network is not subnetted, you can specify a network broadcast address. In this case, you set 
the network portion of the broadcast address to match the Model 5390 network address, as 
determined by the intrinsic mask for the network class. And you set the host portion of the broadcast 
address to all 1-bits. 

Finally, you can set a limited broadcast address of 255.255.255.255 that reaches all nodes on the 
subnet. However, if you have more than one subnet on the same physical cable, the Model 5390 

NOTE: 

This parameter has effect only at the CLI level.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments