manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 202 / 888

Share
Download
Bay Networks 5390 Administering Download Page 202

A9-16

893-741-B

Internetwork Packet Exchange (IPX) Protocol

Overview of ipx mode

A port set to ipx mode allows only FastLink or FastLink II dial-in access. This is the most restrictive 
of the IPX port modes. If an ipx port receives a packet whose protocol is anything other than IPX, 
it discards the packet and hangs-up on the user. Use this mode if:

•

You want to restrict the port to IPX usage.

•

You want to configure/manage the port using na or admin.

•

You do not need proprietary IPX dial-out or routing functions.

In Figure A9-4, the Model 5390 server is connected to (and thereby becomes part of) the Novell 
network shown inside dotted lines. This network supports two PCs and a file server in addition to 
the Model 5390 server. If Model 5390 ports 4 and 11 are set to ipx mode, the two remote workstations, 
PC3 and PC4, can use FastLink II to log into the Novell network and access its file server, just as 
if the PCs were attached to the network directly. The connections between the PCs and the Model 
5390 server can be leased lines or regular phone lines. To configure this type of port, see Configuring 
ipx-mode Ports and Modems on page A9-23.

Figure A9-4. Dial-in Access

PC2

File server

PC1

PC3

Modem

Modem on port 11

Modem on port 4

Modem

PC4

Ethernet

Model 5390 server

5172

System 5000 hub

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments