manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 57 / 888

Share
Download
Bay Networks 5390 Administering Download Page 57

893-741-B

A1-9

Introduction to the Model 5390 Server

Applications for the Model 5390 Server

The Model 5390 server supports many applications that go beyond simply servicing terminals. 
Using the Model 5390 server, you can:

•

Connect terminals, X Window terminals, PCs, modems, and printers.

•

Connect remote hosts, networks, and Model 5390 servers.

•

Connect Apple PowerBook and Macintosh computers.

•

Connect hosts lacking a network interface.

•

Perform remote system management.

Connecting Terminals

The Model 5390 server provides many options for configuring terminal behavior. The terminal can 
have access to the CLI, where the user can create multiple simultaneous sessions to one or more 
hosts. The Model 5390 server provides the ability to hot-key back and forth between these sessions 
with user-defined key sequences. When multiple sessions have been started, those not currently in 
use can be put in the background. This allows messages and notifications (such as the arrival of 
mail) to be displayed on your terminal while you are working in another session.

Connecting X Window Terminals

Generally, X Window terminals have a serial interface as well as 
a network interface. The serial interface can be used to connect the X Window terminal to the 
network. Some X Window vendors provide host-based software, enabling X applications to run 
over a serial line. Other vendors provide SLIP or CSLIP on the terminal for this purpose. In either 
case, the Model 5390 serial ports can be used to connect the X Window terminals, providing full 
transparency to X applications.

Connecting PCs

By running PPP, SLIP, or CSLIP, the user can connect a PC to the network using a serial port attached 
to the Model 5390 server. The PC behaves as an IP host on the network, allowing host connectivity 
via Telnet, mail service via SMTP, and file transfers via FTP. All Internet services are available just 
as if the PC is connected directly to the network.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments