manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 318 / 888

Share
Download
Bay Networks 5390 Administering Download Page 318

A12-60

893-741-B

Internet Protocol (IP) Routing

rip_next_hop

The interface parameter rip_next_hop controls whether or not a route’s next hop is advertised in 
RIP Version 2 updates. Valid options are never, needed, or always. The default is needed. This 
parameter has no effect unless the Model 5390 server is running more than one IP routing protocol. 

rip_recv_version

The interface parameter rip_recv_version controls which RIP version the Model 5390 server 
accepts: 1 indicates that version 1 or higher packets are accepted but the non-RIP-1-specific data 
fields are ignored (for example, version 2 packets are interpreted as version 1 packets); 2 indicates 
only version 2 or higher packets are accepted; and, both indicates both versions are accepted. The 
default is both. For more information, see Advertising RIP 1 and/or RIP 2 Updates on page A12-51.

rip_routers

The Model 5390 parameter rip_routers directs periodic RIP updates to a list of routers rather than 
broadcasting them. The syntax is:

rip_routers router_list 

The argument router_list specifies a list of the IP addresses of up to eight directly reachable routers. 
Separate the addresses with a comma (and no spaces). The Model 5390 server ignores any address 
not on an attached subnet. Specifying all causes RIP updates to be broadcast. The default is all.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments