manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 787 / 888

Share
Download
Bay Networks 5390 Administering Download Page 787

893-741-B

C5-5

Network Protocols

The Internet address 129.091.000.063 is a Class B address. It can be specified as 129.91.0.63. The 
network address is represented by the decimal numbers 129.91; the host address is 63. The 
combination of network address and host address is used to maintain a unique Internet address for 
each host.

For a private network, host addresses can be selected arbitrarily, but must be centrally administered 
to maintain uniqueness. Network addresses should be officially assigned. Internet addresses can be 
obtained from the Network Information Center (NIC).

Subnet Addressing

Another provision of Internet addressing is the subnet. A subnet allows several interconnected local 
networks to share a single network number. The local network could include multiple physical 
networks (such as Ethernet or point-to-point links) but appears to the external network as a single 
entity.

Addressing for a subnet is implemented with the host address section of the Internet address. Within 
a subnetted network, each subnet appears as a distinct network. A subnet mask enables a given host 
within a subnet to determine whether a packet is to be routed in or out of the subnet. The subnet 
mask defines for a host how much of the Internet address is to be used to distinguish hosts on the 
network.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments