manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 641 / 888

Share
Download
Bay Networks 5390 Administering Download Page 641

893-741-B

C2-35

Configuration Parameters

login_timeout

This asynchronous port parameter enables a login timer when the VMS command interface is 
configured (that is, when cli_interface is set to 

vci

). A Y enables this parameter, an N disables it. 

The default is N.

long

_break

This asynchronous port parameter enables the Model 5390 server to return a user to the CLI prompt 
after receiving a break signal of more than two seconds. When disabled, the Model 5390 server 
passes the break to the local application. A Y enables this parameter, an N disables it. The default is Y.

loose_source_route

This Model 5390 parameter controls the Loose Source Routing protocol which defines a sequence 
of IP addresses that a datagram must follow. A Y enables this parameter, an N disables it. The default 
is Y.

When enabled, the Model 5390 server forwards all IP packets that have the Loose Source Routing 
and Record option set. The Model 5390 server forwards all IP packets that have the Strict Source 
Routing and Record option set only if the next routing address is directly reachable by the Model 
5390 server. Otherwise, the Model 5390 server drops these packets and sends an ICMP type 
Destination Unreachable message with a code of Source Route Failed.

When disabled, the Model 5390 server will not forward any IP packets that have the Strict Source 
Routing and Record or Loose Source Routing and Record options set. The Model 5390 server accepts 
these packets only if the Model 5390 server itself is the ultimate destination. If the packets are not 
addressed to the Model 5390 server, they are dropped and the Model 5390 server sends an ICMP 
type Destination Unreachable message with a code of Source Route Failed to the originator.

map

This T1 parameter controls the mapping of the modems to the T1 Drop and Insert Interface (T1DII) 
and the T1 Network Interface (T1NI) DS0 channels. The modems can be mapped to any unoccupied 

NOTE: 

Loose source routing can pose a security risk if you use filters 

on your network router. If you are concerned with security, set this 
parameter to N.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments