manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 427 / 888

Share
Download
Bay Networks 5390 Administering Download Page 427

893-741-B

A15-7

Using Model 5390 Security

•

Define a security server using the pref_secure1_host parameter (for example, 0.0.0.0). 

•

Create an entry in the acp_passwd file (see Creating User Password Files on page A15-11). 

•

If the vcli_security parameter is set to Y, the Model 5390 server tries to use ACP. If ACP is 
down, the Model 5390 server prompts for the password specified in the vcli_password 
parameter. 

•

If the vcli_password parameter is not set (“<unset>”) and the vcli_security parameter is set 
to N, the Model 5390 server prompts for the password specified in the password parameter. 

•

If the password parameter is not set (“<unset>”), the Model 5390 server fails the VCLI 
attempt. 

•

If the vcli_security parameter is set to N and the vcli_password parameter is set (“<set>”), 
the Model 5390 server prompts for the password specified in vcli_password. 

•

If the vcli_security parameter is not set (N) and the vcli_password parameter is not set 
(“<unset>”), the Model 5390 server does not perform a security check for VCLIs. 

•

If the vcli_security parameter is set to Y, the vcli_password parameter is not set (“<unset>”), 
and the password parameter is not set (“<unset>”), the Model 5390 server denies access to 
the VCLI if the security server is unreachable. 

CLI Security 

You can set up security for CLI connections in which users must provide a valid user name and 
password before they are granted access to a CLI: 

•

Define a security server using the pref_secure1_host parameter (for example, 0.0.0.0). 

•

Create an entry in the acp_passwd file (see Creating User Password Files on page A15-11). 

•

If the cli_security parameter is set to Y, the Model 5390 server tries to use ACP. If ACP is 
down, the Model 5390 server prompts for the password specified in the port_password 
parameter.

•

If the port_password parameter is not set (“<unset>”), the Model 5390 server does not 
connect the user to the CLI.

•

If the cli_security parameter is set to N and the port_password parameter is set (“<set>”), 
the Model 5390 server prompts for the password specified in port_password.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments