Bay Networks 5390, Administering, Page: 808 / 888

893-741-B
Software Reference
D1-12
need_dsr Y or N N For use with a modem connected to a slave
port. When enabled, the connection fails if
no DSR signal is present; when disabled,
the Model 5390 server accepts the
connection, but waits for DSR and DCD
before communicating with the modem.
net_inactivity 0–255 0 Defines the amount of time an
asynchronous port can remain inactive
before the port is reset.
net_inactivity_units minutes or
seconds minutes Defines the units of time used for the port’s
inactivity timer.
network_turnaround 1–10 2 Sets the number of seconds to wait for an
answer from a security host.
newline_terminal Y or N N Interprets carriage returns and line feeds at
the CLI level.
node_id 0–65534.255 0.0 Contains the address the Model 5390
server tries to acquire at the start of an
AppleTalk session. If this address is in use,
the Model 5390 server must acquire a new
node ID. This new ID is stored in
non-volatile RAM.
option_key unique value no default Enables ARA, tn3270, active RIP, filtering,
and dial-out routing.
output_flow_control eia, start/stop,
bell, both, none start/stop Defines method of flow control that the
terminal uses to stop output from the
Model 5390 server.
output_is_activity Y or N N Defines activity as output.
output_start_char control char.
sequence ^Q Defines the character that restarts output.
output_stop_char control char.
sequence ^S Defines the control character sequence that
stops output.
Table D1-1. All Parameters (continued)
Parameter Values Default Description