manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 219 / 888

Share
Download
Bay Networks 5390 Administering Download Page 219

893-741-B

A9-33

Internetwork Packet Exchange (IPX) Protocol

The field headings in the above display indicate the following:

•

Network is the number of a destination Netware network.

•

Gateway is the number of the next hop on the path to Network. A gateway of ffffffffffff 
indicates a directly-attached network.

•

Tics indicate the amount of time required to reach Network when Gateway is the next hop. A 
tic is approximately 55 milliseconds.

•

Hops are the number of routers that must be crossed to reach Network.

•

Interface is the network interface using the route.

Issuing the netstat -xr command followed by a network number displays the Model 5390 server 
route for that network. The following example shows how to display the route for network 42 (you 
can omit the leading zeros when specifying the network number): 

annex: netstat -xr 42

Network    Gateway          Tics     Hops     Interface
00000042   0000a2816349     24       5        en0

IPX Servers

Issuing the netstat -xs command displays server names, types, and addresses. 

annex: netstat -xs 

OSCAR File 

Server

[2e80703c]000000000001[0451]

CTEST Annex 

NAS

[00000055]00802d01d252[e480]

VENUS File 

Server 

[00006501]000000000001[0451]

SMTPQ

Advert Print

[00000043]000000000001[8060]

SNOWY

Annex NAS

[00000063]00802d01ea57[e480]

From left to right, the fields in the previous displays are as follows.

•

The first field is the server name, for example, 

SUPT_TJB_INT. 

If the name is longer than 

34 characters, netstat -xs displays only the first 34 characters.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments