manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 229 / 888

Share
Download
Bay Networks 5390 Administering Download Page 229

893-741-B

A10-5

AppleTalk

option_key

The option_key parameter enables the AppleTalk-specific Model 5390 parameters as well as the 
ARA protocol. AppleTalk commands, parameters, and port functions are enabled only after the 
correct key is set; after setting the key, the administrator must reboot the Model 5390 server. Each 
Model 5390 server requires a unique key value. The way to obtain a key depends on the configuration 
and type of Model 5390 server you purchased. Some option key values are physically attached to 
the bottom of the Model 5390 server. If the number is there, use it. If not, contact your supplier to 
obtain an option_key value.

zone

The zone parameter provides the AppleTalk zone for use at startup. It is a 32-byte string variable.This 
is the zone in which ARA clients are located unless overridden by security. The default is a null 
string ("").

AppleTalk-specific Serial Line Port Parameters

The set port command modifies the AppleTalk-specific serial line port parameters; the show port 
command displays them. Table A10-1 lists these per-port parameters; the following subsections 
describe them in detail.

NOTE: 

The option_key parameter enables a variety of Model 5390 

features, including tn3270, AppleTalk, and IPX. When requesting an 
AppleTalk option_key value from your supplier, be sure to mention any 
of the other option_key features currently enabled for your Model 5390 
server. 

NOTE: 

Although the mode parameter is not AppleTalk-specific, it does 

affect AppleTalk and therefore is included in this section.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments