Bay Networks 5390, Administering, Page: 735 / 888

893-741-B C3-59
Using the CLI Commands
The stats -T current command display looks like this:
The information displayed from a stats -T command is described in
Table C3-27.
Table C3-27. The stats -T Command Display
Field Description
Sync When Sync is true, the T1 engine is detecting frame
synchronization. When Sync is false. the T1 engine has
lost frame synchronization and enters the red alarm state.
Loss of Signal When Loss of Signal is true, the T1 engine is not
detecting pulses on the T1 network interface receiver.
When Loss of Signal is false, the T1 network interface is
receiving pulses. The loss of signal condition causes the
T1 engine to transmit AIS (all ones unframed) on the T1
network interface.
annex# stats -T current
alarm history:[no blue no red no yellow], Fri July 28 16:48:37 19
Alarms: no blue no red no yellow
engine: offline no sync no D&I sync no loss of signal
serial number: 0811
circuit ID:
T1 info:
unit ID: XYLOGICS T1-ENGINE 085234 Rev. A 07/19/95 6343
loopback mode: No loopback uptime: 69:07:49
Current Statistics
number of valid seconds: 469
bursty errored seconds (ESF only):0 Controlled slip seconds:0
errored seconds: 0 Severely errored seconds:0
unavailable seconds: 0
out of frame errors: 0 bipolar violations:0
CRC errors (ESF only): 0 controlled slilps:0
received net alarms: 0
annex#