manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 639 / 888

Share
Download
Bay Networks 5390 Administering Download Page 639

893-741-B

C2-33

Configuration Parameters

local_address

This asynchronous port parameter defines the IP address for the asynchronous port on the Model 
5390 server side of the link. This IP address is used only when the mode parameter is set to slip or 
ppp. The default is 0.0.0.0. 

location

This asynchronous port parameter defines an asynchronous port location or description that displays 
with the CLI who command. The string size ranges from 0 to 16 characters. The default is a null 
string ("").

lock_enable

This Model 5390 parameter enables any port to use the Model 5390 Interface for VMS 
Environment’s lock command. A Y enables this parameter, an N disables it. The default is N.

self

Instructs the Model 5390 server to boot its image from the Flash 
ROMs. Because the Model 5390 server cannot dump back to 
itself, when booting via self, always have a secondary load/dump 
interface by setting load_dump_sequence to self,net or 
self,slnn.

Table C2-8.

Valid Options for the load_dump_sequence Parameter 

Option

Description

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments