manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 532 / 888

Share
Download
Bay Networks 5390 Administering Download Page 532

B1-24

893-741-B

Network Administration

132.245.11.11:420b02c6:#01:950626:013758:rlogin:logout:132.245.33.7:mildram
132.245.11.11:420b02c9:#01:950626:064309:telnet:login:132.245.77.1:23:tetreault
132.245.11.11:420b02ca:#02:950626:064948:cli hook:login:mcgillivray
132.245.11.11:420b02cb:#02:950626:064949:telnet:login:132.245.77.1:23:mcgill
132.245.11.11:420b02cc:#01:950626:065207:telnet:logout:132.245.77.1:tetreault
132.245.11.11:420b02ce:#01:950626:070102:cli hook:login:pearson
132.245.11.11:420b02cf:#01:950626:070109:telnet:login:132.245.77.1:23:pearson
132.245.11.11:420b02d0:#02:950626:070434:telnet:logout:132.245.77.1:mcgillivray
132.245.11.11:420b02d1:#02:950626:070436:cli hook:logout:mcgillivray
132.245.11.11:420b02d1:#02:950626:070436:cli hook:acct:0:0:1063:69595:mcgill
132.245.11.11:420b02d2:#01:950626:071048:telnet:logout:132.245.77.1:pearson

Events are written continuously to the file acp_logfile. To prevent this file from overwhelming the 
file system on the hosts, and still obtain the record information for generating reports, move and 
compress the file at regular intervals. The size of your network, the number of Model 5390 servers, 
and the amount of activity generated at each Model 5390 server determines the frequency for moving 
and compressing the file.

Events written while using ARA or the dial-back security feature have their own messages:

•

bad access code

Users entered an unidentified access code for the defined user 
name —the login was terminated.

•

call-back

Users logged in with a known user name and access code—the Model 5390 server calls back 
a pre-defined phone number (this log can be generated by any of the features that perform a 
call-back, including dial-back security and ARA); possible status values are request, ok, no 
answer, or no device.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments