Atmel SAM9X25, Manual

Page: 1061 / 1145

1061
11054A–ATARM–27-Jul-11
SAM9X25
1061
11054A–ATARM–27-Jul-11
SAM9X25
45.6.5 Receive Buffer Queue Pointer Register
Name: EMAC_RBQP
Address: 0xF802C018
Access: Read-write
This register points to the entry in the receive buffer queue (descriptor list) currently being used. It is written with the start
location of the receive buffer descriptor list. The lower order bits increment as buffers are used up and wrap to their original
values after either 1024 buffers or when the wrap bit of the entry is set.
Reading this register returns the location of the descriptor currently being accessed. This value increments as buffers are
used. Software should not use this register for determining where to remove received frames from the queue as it con-
stantly changes as new frames are received. Software should instead work its way through the buffer descriptor queue
checking the used bits.
Receive buffer writes also comprise bursts of two words and, as with transmit buffer reads, it is recommended that bit 2 is
always written with zero to prevent a burst crossing a 1K boundary, in violation of section 3.6 of the AMBA specification.
• ADDR: Receive buffer queue pointer address
Written with the address of the start of the receive queue, reads as a pointer to the current buffer being used.
31 30 29 28 27 26 25 24
ADDR
23 22 21 20 19 18 17 16
ADDR
15 14 13 12 11 10 9 8
ADDR
7 6 5 4 3 2 1 0
ADDR – –