Atmel SAM9X25, Manual

Page: 386 / 1145

386
11054A–ATARM–27-Jul-11
SAM9X25
386
11054A–ATARM–27-Jul-11
SAM9X25
Figure 29-10. READ_MODE = 1: Data is sampled by SMC before the rising edge of NRD
29.9.2.2 Read is Controlled by NCS (READ_MODE = 0)
Figure 29-11 shows the typical read cycle of an LCD module. The read data is valid t
PACC
after
the falling edge of the NCS signal and remains valid until the rising edge of NCS. Data must be
sampled when NCS is raised. In that case, the READ_MODE must be set to 0 (read is controlled
by NCS): the SMC internally samples the data on the rising edge of Master Clock that generates
the rising edge of NCS, whatever the programmed waveform of NRD may be.
Figure 29-11. READ_MODE = 0: Data is sampled by SMC before the rising edge of NCS
Data Sampling
t
PACC
MCK
A[25:2]
NBS0,NBS1,
NBS2,NBS3,
A0, A1
NCS
NRD
D[31:0]
Data Sampling
t
PACC
MCK
D[31:0]
A[25:2]
NBS0,NBS1,
NBS2,NBS3,
A0, A1
NCS
NRD