Suzuki 2000 Grand Vitara SQ416, Руководство по обслуживанию

Страница: 27 / 729

YH4
GRAND
VITARA
ENGINE DIAGNOSIS (G16 / J20 ENGINES) 6-23
SCAN TOOL DATA CONDITION
NORMAL CONDITION/
REFERENCE VALUE
OTHER
VSS (for 4-A/T)
(Vehicle Speed Sensor) At stop. 0 km/h 0 MPH
:
GEAR POSITION (for 4-A / T) Ignition switch ON, selector lever is shifted at
“R”, “D”, “2” or “L” range and vehicle stops. 1st
:
THROT POS LEVEL
(Throttle Position Level for
4-A / T)
“0” (about idle position), “1”, “2”, “3”, “4”, “5”, “6” or “7” (about full open) appears
according to throttle valve opening.
:
SHIFT SOL
#
1 (A)
CON (Shift Solenoid
#
1
Command Signal)
MON (Shift Solenoid
#
1 Monitor)
Ignition switch ON
Selector lever is shifted at “P”, “R”, “N”, “D”, “2”
or “L” range.
Vehicle stops. ON
:
SHIFT SOL
#
2 (B)
CON (Shift Solenoid
#
2
Command Signal)
MON (Shift Solenoid
#
2 Monitor)
Ignition switch ON
Selector lever is shifted at “P”, “R”, “N”, “D”, “2”
or “L” range.
Vehicle stops. OFF
:
TCC SOL
CON (Torque Converter Clutch
Solenoid Command Signal)
MON (Torque Converter Clutch
Solenoid Monitor) Ignition switch ON
Selector lever is shifted at “P”, “R”, “N”, “D”, “2”
or “L” range.
Vehicle stops. OFF
:
TRANS RANGE Ignition switch ON, selector lever is at “P”, “R”, “N”, “D”, P, R, N, D, 2 or L
:
“2” or “L” range.
:
BRAKE SW Ignition switch ON, Brake pedal is released. OFF
:
(Brake, Stop Lamp, Switch)
Ignition switch ON, Brake pedal is depressed. ON
:
O/D OFF SW Ignition switch ON, Overdrive cut switch OFF. OFF
:
(Overdrive Cut Switch)
Ignition switch ON, Overdrive cut switch ON. ON
:
MODE SELECT SW
(Power/Normal Change
Ignition switch ON, P/N change switch is at
normal position. NORMAL
:
Switch)
Ignition switch ON, P/N change switch is at
power position. POWER
:
4WD-L SW
(4WD Low Switch) Ignition switch ON, Transfer lever is shifted at
“4H” or “2H” position. OFF
:
Ignition switch ON, Transfer lever is shifted at
“4L” position. ON
: