Suzuki 2000 Grand Vitara SQ416, Руководство по обслуживанию

Страница: 137 / 729

YH4
GRAND
VITARA
6-1-26 ENGINE (H25 ENGINE)
FAIL-SAFE TABLE
When any of the following DTCs is detected, ECM enters fall-safe mode as long as malfunction continues to exist
but that mode is canceled when ECM detects normal condition after that.
DTC
NO.
TROUBLE AREA FAIL SAFE OPERATION
FAIL SAFE MODE REACTIVATION
CONDITION
P0100
(No.33,
34) MAF SENSOR Injector drive time (fuel injection vol-
ume) is determined according to
throttle valve operating (idle position
or not). Detected value of MAF sensor
output voltage is 0.3 V min. and
5.0 V max.
P0110
(No.23,
25) IAT SENSOR ENGINE control is performed on the
basis of 40
_
C intake air temp.
Detected value of IAT sensor output
voltage is 0.16 V min. and 5.00 V
max.
P0115
(No.14,
15) ECT SENSOR
D
ENGINE control is performed on
the basis of 80
_
C engine coolant
temp.
D
A / T control is performed on the
basis of 31
_
C engine coolant
temp.
Detected value of ECT sensor
output voltage is 0.16 V min.
and 5.00 V max.
P0120
(No.21,
22) TP SENSOR
D
ENGINE control is performed on
the basis of 8 deg. throttle opening.
D
A / T control is performed on the
basis of 0 % throttle position.
Detected value of TP sensor
output voltage is 0.10 V min. and
4.80 V max.
P0500
(No.24) VEHICLE SPEED
SENSOR ENGINE control is performed on the
basis of 10 km / h vehicle speed.
And air flow at IAC valve is limited. Vehicle speed sensor signal is
detected.
P0705 TR SWITCH A / T control is performed in priority
order of L, 2, N, D and R when more
than one of R, D, N, 2 and L signals
are inputted simultaneously. Single signal is inputted.
P0720 OUTPUT SPEED
SENSOR CIRCUIT
MALFUNCTION A / T control is performed by using
signal from VSS. Detected vehicle speed signal is 10
km / h (6 mph) or more.
P0753 SHIFT SOLENOID
A (#1) SHIFT SOLENOID #1 : OFF
SHIFT SOLENOID #2 : ON
TCC SOLENOID
: OFF
Monitor signal ON is detected
when solenoid A (#1) is ON and
monitor signal OFF is detected
when it is OFF.
P0758 SHIFT SOLENOID
B (#2) SHIFT SOLENOID #1 : OFF
SHIFT SOLENOID #2 : OFF
TCC SOLENOID
: OFF
Monitor signal ON is detected
when solenoid B (#2) is ON and
monitor signal OFF is detected
when it is OFF.
P0743 TCC (LOCK-UP)
SOLENOID TCC (Lock-up) solenoid OFF Monitor signal ON is detected
when TCC control solenoid is ON
and monitor signal OFF is detected
when it is OFF.