Suzuki 2000 Grand Vitara SQ416, Руководство по обслуживанию

Страница: 644 / 729

YH4
GRAND
VITARA
6F1-8 IGNITION SYSTEM (FOR G16 ENGINE)
1. Ignition coil assembly
2. High-tension cord
1. Ignition coil assembly
2. High-tension cord
ON-VEHICLE SERVICE
HIGH-TENSION CORD
REMOVAL
1) Remove high-tension cord from ignition coil assembly while
gripping its cap.
2) Pull out high-tension cord from spark plug while gripping its cap.
CAUTION:
Removal of high-tension cords together with clamps
will be recommended so as to damage their inside wire
(resistive conductor).
For the same reason, pull out each connection by grip-
ping cap portion.
INSPECTION
Measure resistance of high-tension cord by using ohmmeter.
High-tension cord resistance: 4 – 10 k / m (1.2 – 3.0 k / ft)
Check for damage, deterioration and terminal corrosion.
If check result is not satisfactory, replace high-tension cord(s).
INSTALLATION
1) Install high-tension cord to spark plug and ignition coil assembly
while gripping its cap.
CAUTION:
Never attempt to use metal conductor high-tension
cord(s) as replacing parts.
Insert each cap potion fully when installing high-ten-
sion cords.