Suzuki 2000 Grand Vitara SQ416, Руководство по обслуживанию

Страница: 513 / 729

YH4
GRAND
VITARA
6B-8 ENGINE COOLING
1. Reservoir
2. FULL level mark
3. LOW level mark
4. Arrow mark
3) Stop engine and open radiator drain plug to drain coolant.
4) Close drain plug (1). Add water until system is filled and run en-
gine until upper radiator hose is hot again.
5) Repeat steps 3) and 4) several times until drained liquid is
nearly colorless.
6) Drain cooling system and then close radiator drain plug tightly.
7) Disconnect hose from reservoir. Remove reservoir and pour
out any fluid. Scrub and clean inside of reservoir with soap and
water. Flush it well with clean water and drain.
Reinstall reservoir and hose.
8) Add 50 / 50 mixture of good quality ethylene glycol antifreeze
and water to radiator and tank.
Fill radiator to the base of radiator filler neck and reservoir to
“FULL” level mark. Reinstall reservoir cap, aligning the arrow
marks on the reservoir and cap.
9) Run engine, with radiator cap removed, until radiator upper
hose is hot.
10) With engine idling, add coolant to radiator until level reaches
the bottom of filler neck. Install radiator cap, making sure that
the ear of cap lines up with reservoir hose.