Suzuki 2000 Grand Vitara SQ416, Руководство по обслуживанию

Страница: 150 / 729

YH4
GRAND
VITARA
ENGINE (H25 ENGINE) 6-1-39
TERMINAL CIRCUIT NORMAL VOLTAGE CONDITION
E61 1 Fuel pump relay
0 – 2.5 V
For 3 sec. after ignition switch ON or while engine
running.
E61-1 Fuel pump relay
10 – 14 V
After 3 sec. from ignition switch ON with engine
stopped.
E61-2 ——— ——— ———
E61-3 ——— ——— ———
E61-4 Tachometer 0 – 0.8 V Ignition switch ON, engine stops.
E61 5
A / C condenser fan motor relay
10 – 14 V Ignition switch ON.
E61-5
y
(if equipped)
0 – 2.5 V A / C condenser fan motor ON.
E61-6 ——— ——— ———
E61 7 “O / D OFF” lamp (A / T VEHICLE)
0 – 2.5 V
For 4 sec. after ignition switch ON, overdrive cut
switch ON.
E61-7 “O / D OFF” lamp (A / T VEHICLE)
10 – 14 V
After 4 sec. from ignition switch ON and overdrive cut
switch OFF.
E61 8 Main relay
10 – 14 V Ignition switch OFF.
E61-8 Main relay
0 – 2 V Ignition switch ON.
E61 9
Power / Normal change switch
0 – 1 V
For 4 sec. after ignition switch ON, P / N change switch
in POWER mode
E61-9
g
(A / T VEHICLE)
10 – 14 V
Ignition switch ON, P / N change switch: NORMAL
mode
E61 10 “POWER” lamp (A / T VEHICLE)
0 – 2.5 V
Ignition switch ON, P / N change switch: POWER
mode
E61-10 “POWER” lamp (A / T VEHICLE)
10 – 14 V
Ignition switch ON, P / N change switch: NORMAL
mode
E61-11 ——— ——— ———
E61-12 Fuel level sensor
0.7 – 5.5 V
(Full) (Empty)
Ignition switch ON.
E61 13 Heater blower switch
10 – 14 V Ignition switch ON, heater blower switch OFF.
E61-13 Heater blower switch
0 – 2.5 V Ignition switch ON, heater blower switch ON.
E61 14 Overdrive cut switch (A / T VEHICLE)
10 – 14 V Ignition switch ON, overdrive cut switch OFF.
E61-14 Overdrive cut switch (A / T VEHICLE)
0 – 1 V Ignition switch ON, overdrive cut switch ON.
0 – 1 V Rear defogger switch OFF.
E61-15 Rear defogger switch (if equipped)
10 – 14 V
Ignition switch ON.
Rear defogger switch ON.
E61-16
Test switch terminal (vehicle with
monitor connector)
10 – 14 V Ignition switch ON.
E61-17
Output duty select switch terminal
(vehicle with monitor connector)
10 – 14 V Ignition switch ON.
E61-18 ABS control module (if equipped) 10 – 14 V Ignition switch ON.
E61-19 CO adjusting resistor (if equipped) ——— ———
E61-20 ——— ——— ———