Suzuki 2000 Grand Vitara SQ416, Руководство по обслуживанию

Страница: 152 / 729

YH4
GRAND
VITARA
ENGINE (H25 ENGINE) 6-1-41
TERMINAL CIRCUIT NORMAL VOLTAGE CONDITION
C51-3-9 Camshaft position sensor (POS)
Deflects between
0 – 1 V and 4 – 6 V
Ignition switch ON, crankshaft turned slowly.
C51-3-10 Camshaft position sensor (REF)
Deflects between
0 – 1 V and 4 – 6 V
Ignition switch ON, camshaft turned slowly.
C51-3-11
Power source for TP sensor and
MAP sensor
4.75 – 5.25 V Ignition switch ON.
C51 3 12 Throttle position sensor
0.35 – 0.65 V Ignition switch ON, throttle valve at idle position.
C51-3-12 Throttle position sensor
3.5 – 4.5 V Ignition switch ON, throttle valve at full open position.
C51-3-13 Manifold absolute pressure sensor 3.3 – 4.3 V Ignition switch ON.
C51-3-14
Heated oxygen sensor
(Bank 1 – Sensor 2) (if equipped)
——- ———
C51-3-15
Heated oxygen sensor
(Bank 2 – Sensor 1) (if equipped)
Deflect between
over and
under 0.5 V
While engine running at 2000 r / min.
for 1 min. or longer after warmed up.
10 – 14 V Ignition switch ON.
C51-3-16
Heater of HO2S
(Bank 2 – Sensor 2) (if equipped)
Deflect between
0 – 1 V and
10 – 14 V
At specified idle speed after engine warmed up.
10 – 14 V Ignition switch ON.
C51-3-17
Heater of HO2S
(Bank 1 – Sensor 2) (if equipped)
Deflect between
0 – 1 V and
10 – 14 V
At specified idle speed after engine warmed up.
C51-3-18 ——— ——— ———
C51-3-19 ——— ——— ———
C51-3-20, 21 Ground ——— ———
C51-3-22 Engine coolant temp. sensor 0.5 – 0.9 V
Ignition switch ON, Engine coolant temp.:
80
_
C, 176
_
F
C51 3 23 Mass air flow sensor
0.5 – 1.0 V Ignition switch ON and engine stops.
C51-3-23 Mass air flow sensor
1.5 – 1.8 V With engine running at idle speed.
C51-3-24
Heated oxygen sensor
(Bank 2 – Sensor 2) (if equipped)
——— ———
C51-3-25, 26 Ground ——— ———
C51-1-1 Shift solenoid B (A / T VEHICLE) 0 – 1 V Ignition switch ON.
C51-1-2 TCC solenoid (A / T VEHICLE) 0 – 1 V Ignition switch ON.
Transmission range switch “R”
10 – 14 V Ignition switch ON, selector lever: “R” range
C51-1-3
Transmission range switch “R”
(A / T VEHICLE)
0 – 1 V
Ignition switch ON, selector lever: Other than “R”
range
Transmission range switch “P”
10 – 14 V Ignition switch ON, selector lever: “P” range
C51-1-4
Transmission range switch “P”
(A / T VEHICLE)
0 – 1 V
Ignition switch ON, selector lever: Other than “P”
range
C51-1-5
4WD low switch (if equipped)
0 – 1 V Ignition switch ON, transfer lever: 4WD low range
C51-1-5
(A / T VEHICLE)
10 – 14 V Ignition switch ON, transfer lever: 4H or 2H range