Shihlin electric SDP Series, Руководство пользователя

Страница: 470 / 555

457
Drive Model Type
SDP-□□□A2C
010 020 040 075 100 150 200 300
Servo Motor type
SME-□□□□
L005
L010
L020 L040 L075 L100 L150 L200 L300
-- -- -- -- M100 M150 M200 M300
-- H020
H040 H075
H085 -- -- H130 H180
Motor capacity
50W
200W 400W 750W
1.0KW
1.5KW 2KW
3.0KW
100W 850W 1.3KW 1.8KW
D
igit
al
inp
ut
/ou
tpu
t
Digital Input
Servo on, forward and reverse rotation limit , pulse deviation elimination,
torque direction option, speed command selection, position command
selection, forward and reverse rotation command, proportional control
switching, torque limit switching, alarm reset, emergency stop, control mode
switching, E-Gear ratio selection, gain switching, position command
selection, position command trigger, motor stop, pulse input inhibit, event
trigger command, origin point, homing. E-Cam engaged.
Digital Output
ABZ Line driver output, Z open collector type output.
Torque limit reached, speed limit reached, servo ready, zero speed reached,
target position reached, target speed reached, servo alarm, servo warning,
homing is completed, overload level reached, internal position is attained,
position command overflows, software positive limit reached, software
reverse limit reached.
Analog input Analog speed command/limit, Analog torque command/limit.
Analog output
Command pulse frequency, pulse deviation, current command,
DC bus
voltage, servo motor speed, motor torque value.
E
nv
ironmen
t
Temperature
0
℃
~ 55
℃
(
If the operating temperature is above 45˚C,
forced cooling is required)
Storage: -20~65
℃
(Non-freezing)
Humidity
Maximum 90% RH (Non-condensing)
Storage: below 90%RH (Non-condensing)
Installation site
Indoors (avoid direct sunlight), no corrosive vapor,
avoid flammable gases, fumes and dust.
Altitude Altitude below 1000m
Vibration Maximum 5.9m/s 2
Cooling method
Air convection cooling,
IP20.
Fan cooling, IP20.