Shihlin electric SDP Series, Руководство пользователя

Страница: 331 / 555

318
pulse.
PC75 TQ1 Internal torque command 1
The first internal torque command(100% indicates
rated torque)
T 100
-300~
300
%
PC76 TQ2 Internal torque command 2
The 2nd internal torque command(100% indicates
rated torque)
T 100
-300~
300
%
PC77 TQ3 Internal torque command 3
The 3rd internal torque command(100% indicates
rated torque)
T 100
-300~
300
%
PC78 CXFT Filter setting for synchronous capture axis Correction
u z y x
yx: range of filter (%)
The new correction rate is calculated after the
synchronous Capture axis captures the signal. If
both the new and previous correction rates are less
than the range (%) set in this parameter, they are
filtered out. Otherwise, the error is corrected with the
new correction rate.
yx 00 01~5F
Func
tion
Filter
disabled
If | Error | ≤ (1 - yx)%, then the
filter is enabled
Z: filter intensity (Increasing the value will slow down
the changes and improve the filter function.)
z 0 1~F
Func
tion
Filter
disabled
Use the average times of
(2 to the z power)
u: value definition (read-only)
u=0: filter is disabled, and it indicates the correction
rate and previous error is out of the yx set range.
u=1: filter is enabled, and it indicates the correction
Pr 0000h
0h
~
1F5Fh
N/A