Nortel INM 4.1, Руководство по планированию

Страница: 56 / 202

56 of 202 INM 4.1 New Feature Description
INM Broadband Release 4.1 PG OC 98-13 Issue 1.2
Alarm List GUI Enhancements
Several GUI enhancements are being introduced in INM Broadband Release
4.1:
• Alarm dialog resizing:
- The old Detailed Alarms dialog has been modified (shown in
Figure 16 on page 57) and is resizable in INM Broadband Release 4.1.
The user can resize the upper or lower part of the dialog by dragging
the horizontal boundary line. The heights of the lists that are displayed
in both parts are updated accordingly.
- The user can also resize the whole Alarms Dialog. When the dialog
is resized, the list in the upper and lower parts are resized accordingly.
Therefore the ratio between the upper and lower part sizes are pre-
served after resizing is performed. Figure 18 on page 58 shows a
resized Alarms Dialog.
• Updating modes:
- The old “Display Options” and “List Options” are replaced by the
“Update Alarms” section (Figure 16 on page 57). This new area con-
tains:
- the Auto-refresh check button. If this button is checked, then
any new incoming alarm from the displayed NEs will be imme-
diately displayed in the list. When this button is switched from
unchecked to checked, the alarm list is updated, if needed at that
time.
- the
Manual Refresh
action button. When pressed, it pro-
vokes the update of the alarm list with all the alarms received
from the displayed NEs, since the last manual update. This but-
ton is disabled if the
Auto-refresh
button is checked or if no
new alarm has arrived since the last manual update.