Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Страница: 576 / 585

MiVoice Office 250 Installation and Administration Guide
548
Trace Settings
The configuration files contain the trace parameters as described in Table 98 . Some of the
parameters can also be programmed in the IP Phone Web Client Administrative Session. The IP
Phone Web Client field names and their reference pages that correspond to the parameters are also
shown in this table.
Export and Import Devices
When another node adds a new extension or changes an existing extension, username, or
description, the network broadcasts the new extension information to the other nodes in the network.
Or, system administrators can choose to export local device information to other nodes, or import
devices from the other nodes to the local node, using the Export/Import option in this menu. If there
is a conflicting (duplicate) extension in a broadcast from another node, the receiving node ignores
the new extension in favor of its existing extension number.
8690_gui_ image_ver N/A (
For the 8690 Phone Only
) The user
interface firmware version string.
N/A
8690_gui_ image_url N/A (
For the 8690 Phone Only
) The IP address
or URL of the image TFTP server of the user
interface firmware image. Required if the
DHCP does not provide the TFTP address.
You can also include the path to the profile
file, if desired. For example, if the TFTP
server IP address is “192.168.200.150” and
the path file is “/image,” then you can specify
the URL as
“192.168.200.150/image/image-1-3-4.bin.”
N/A
Table 99: IP Phone Web Client Field Names—Trace Settings
Parameter Default Indicates
IP Phone
Web Client (Page #)
trace_ip 0.0.0.0 The address of the remote device where
trace output should be sent.
See “Trace Host” on page 539.
trace_port 0 The port number of the remote device where
trace output should be sent.
See “Trace Host Port” on
page 539.
trace_flags 0x00000000 Enable specific trace features.
• 0x01 – Turn on SIP traces.
• 0x02 – Turn on UDP traces.
• 0x10 – Turn on serial and telnet logs.
To turn on all of the trace features,
use the
following value: 0x13.
See “Trace SIP” on page 539.
See “UDP Trace Log” on
page 539.
See “Telnet/Serial Trace Log”
on page 539.
Table 98: IP Phone Web Client Field Names—Software Images (Continued)
Parameter Default Indicates (Continued)
IP Phone WEB
Client (Page #)
(Sheet 2 of 2)