Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Страница: 559 / 585

Phones
531
Self-Programming Mode (8620/8622 and 8662 Phones Only)
Use the self-programming mode to configure the 8620/8622 and 8662 phones. This
self-programming mode is similar to the 8660 IP phone. It allows you to set all the basic settings
required for ITP mode.
The following phones do not support self-programming mode:
• 8600 Phone : This phone does not have a display. Hold 7 and 8 during power up to default its
configuration.
• 8690 Phone : Even though the 8690 phone has a virtual six-line display, it does not support
self-programming mode because there are no physical buttons to hold during power up. Instead,
you can configure the network settings through the Setup Wizard. For details, see page 552.
To use the self-programming mode on 8620/8622 and 8662 phones:
1. While pressing 7 and 8 together on your phone, unplug and replace the phone power cord. The
phone enters the self-programming mode and the following screen appears on the phone
display.
Six-Line Display for the 8662 Phone:
Two-Line Display for the 8620/8622 Phone:
2. Choose from the following options:
• Program Database : Allows you to program the static network settings through a series of
screens that follow (see page 532).
• Default Database : Allows you to use predefined defaults for the settings (see page 533).
• Exit : Allows you to exit the self-programming mode without making any changes (see
page 533).
With an 8662 phone
, select one of the options using the menu selection button next to the LCD.
With an 8620/8622 phone , press 1 to program the database or 2 to default the database. Or,
you can use the lower six programmable buttons in both of the right-most. These buttons have
the same functionality that the corresponding six-line display menu button would for each of the
self-programming screens.
Selection
Menu
Selection
Buttons
Table 80:
P R O G R A M M I N G M O D E
Menu
Buttons
Table 81:
P R O G R A M D B = 1