Mitel MIVOICE OFFICE 250 Скачать руководство пользователя страница 327

Страница: 327 / 585

Installation

299

Installing an Optional Headset on a Digital Telephone

For headset requirements, see “Optional Headsets” on page 101.

To attach a headset to an applicable digital telephone*:

*Includes Executive, Professional, Standard, or Associate Display phones; or the Mitel 8500

phone.

Remove the coiled handset cord from the handset jack on the bottom of the phone. Leave the

handset in the cradle.

Insert the headset modular plug into the jack. Plug in the headset power source, if used.

If the headset has an ON/OFF switch, turn ON the headset.

On the phone, press the Special button and enter the Headset Enable feature code (default

value is 315).

To disable the headset

, press the Special button and enter the Headset Disable feature code

(default value is 316). Unplug the headset and reconnect the handset.

To attach a headset to a Mitel 8520 or 8560 phone:

Insert the headset modular plug into the jack located underneath the phone. Plug in the headset

power source, if used.

If the headset has an ON/OFF switch, turn ON the headset.

On the phone, press

and enter the Headset Enable feature code (default value is 315).

To disable the headset

, press

and enter the Headset Disable feature code (default value

is 316). Unplug the headset and reconnect the handset.



Содержание MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды

Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды