Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Страница: 302 / 585

MiVoice Office 250 Installation and Administration Guide
274
To wall-mount the Mitel 8600 series phones that have a support mechanism:
1. Collapse the support mechanism completely and secure it against the bottom housing of the
phone, as shown in the following illustration.
2. Close the base completely so that it lies flat against the phone. (The two rivet holes on the base
align with the two rivet holes on the bottom housing of the phone.)
3. Plug the four-inch line cord into the jack on the back of the phone and thread the line cord
through the wall-mount knockout on the base.
4. Insert the two plastic rivets through the base and press them firmly into the holes on the bottom
housing of the phone. This locks the base to the phone.
5. Test the base to verify that it is securely locked to the phone.
6. Re-attach the metal plate to the phone base.
7. Plug the line cord into the jack on the wall-mount bracket and position the phone securely on
the wall-mount bracket.
8. Flip the handset hanger down to the horizontal position and lock it into place. This will hold the
handset in place.
The following instructions apply to phones that have release buttons located on the bottom housing
of the phone. To disengage the locking mechanism in the base, push in both buttons. To lock the
base in position, release the buttons.
Bottom Housing
(Base not shown)
Rivet Holes
Support
Mechanism
Base
Rivet Holes