Mitel MIVOICE OFFICE 250 Скачать руководство пользователя страница 27

Страница: 27 / 585

xxvii

Secure Socket Layer

1995-1998 Eric Young ([email protected])

This package is an SSL implementation written by Eric Young ([email protected]). The

implementation was written so as to conform with Netscapes SSL. This library is free for commercial

and non-commercial use as long as the following conditions are adhered to. The following conditions

apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the

SSL code. The SSL documentation included with this distribution is covered by the same copyright

terms except that the holder is Tim Hudson ([email protected]).

If this package is used in a product, Eric Young should be given attribution as the author of the parts

of the library used. This can be in the form of a textual message at program startup or in

documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

Redistributions of source code must retain the copyright notice, this list of conditions and the

following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions

and the following disclaimer in the documentation and/or other materials provided with the

distribution.

All advertising materials mentioning features or use of this software must display the following

acknowledgement:

“This product includes cryptographic software written by Eric Young ([email protected])” The

word ‘cryptographic’ can be left out if the routines from the library being used are not

cryptographic related.

If you include any Windows specific code (or a derivative thereof) from the apps directory

(application code) you must include an acknowledgement:

“This product includes software written by Tim Hudson ([email protected])”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot

be changed. i.e. this code cannot simply be copied and put under another distribution licence

[including the GNU Public Licence.]

Содержание MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды

Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды