Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Страница: 544 / 585

MiVoice Office 250 Installation and Administration Guide
516
Full Duplex Speakerphones for IP Phones
For full-duplex operation without any limitations, use one of the following Mitel IP phones:
• 5224
• 5312
• 5320
• 5324
• 5330
• 5340
• 5360
See “IP Phones” on page 480 for more details about these phones.
LCD
The following sections provide information about the phone liquid crystal display (LCD).
Menu Keys
Some phones have feature-related menus that change with the function being performed by the
phone (intercom call, outgoing call, programming, etc.). Menu selection keys that are used for menu
features appear next to or below the CALL buttons.
All Executive Display, Professional Display, and 8560 phones have a six-line display. Each line has
16 characters. The top two LCD lines display standard call information and show the same displays
as other display phones. The remaining four LCD lines display menu options. These lines have
menu selection buttons on both sides (eight buttons) that are used for executing menu features.
When two prompts appear on an LCD line, such as
PREVIOUS
and
NEXT
, the button next to the
word is the one that selects named feature. When only one prompt appears on a display line, such
as
DO-NOT-DISTURB
, then pressing the button on either side of the prompt selects the named feature.
A system-wide flag called “Alternate Keyset Menu Displays” determines the display that 8660 phone
users see during an outgoing call. In the default state, the display shows the menu (shown) with
Transfer-To-Hold on the first menu and Flash on the “More...” menu.
If the Alternate Keyset Menu Displays flag is enabled, 8660 phone users see the menu with Flash
(shown) on the first menu and Transfer-To-Hold in the “More...” menu.
HOLD
TRANSFER
TRANSFER-TO-HOLD
MUTE
SYS HOLD
CNF
MORE...