Mitel MIVOICE OFFICE 250 Скачать руководство пользователя страница 504

Страница: 504 / 585

MiVoice Office 250 Installation and Administration Guide

476

MD5

License to copy and use this software is granted provided that it is identified as the “RSA Data

Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing this software

or this function.

License is also granted to make and use derivative works provided that such works are identified

as “derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material

mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this

software or the suitability of this software for any particular purpose. It is provided “as is” without

express or implied warranty of any kind.

These notices must be retained in any copies of any part of this documentation and/or software.

SQLite

All of the deliverable code in SQLite has been dedicated to the public domain by the authors. All

code authors, and representatives of the companies they work for, have signed affidavits dedicating

their contributions to the public domain and originals of those signed affidavits are stored in a firesafe

at the main offices of Hwaci. Anyone is free to copy, modify, publish, use, compile, sell, or distribute

the original SQLite code, either in source code form or as a compiled binary, for any purpose,

commercial or non-commercial, and by any means.

Embedded Configurable Operating System

Part of the software embedded in this product is eCos—Embedded Configurable Operating

THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY RED HAT AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Содержание MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды

Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды