Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Страница: 240 / 585

MiVoice Office 250 Installation and Administration Guide
212
Labeling Station Cable and Mapping Circuit Numbers
Label both ends of each cable with the station circuit number (hardware address) and how it relates
to the corresponding location in the DEI chassis. All circuit numbers are preceded with a two-digit
node number. For example, 02.02.16.01 is a port on node 2, module 2, circuit 16.
In some circumstances, a station circuit can have more than one purpose. For example, two single
line devices can be installed on a single DEM-16 circuit. The first device is assigned circuit number
XX.YY.01, and the second device is assigned circuit number XX.YY.02. Similarly, a PC Data Port
Module and Modem Data Port Module can be assigned circuit numbers. In this case, the phone is
assigned circuit number XX.YY.01, the first data port is assigned number XX.YY.02, and the second
data port is assigned number XX.YY.03. For detailed information about programming phones, refer
to the
MiVoice Office 250 Features and Programming Guide
.
The default system assigns extension number 1000 to station circuit 01.01.01, extension number
1001 to station circuit 01.02.01, and so on to match the initial configuration. Circuit 01.01.01 is
equipped as an administrator and as the primary attendant phone when the system is in the default
configuration. Through DB Programming, the circuits can be assigned 1–5 digit extension numbers.
Figure 17 on
page 213
illustrates how the Bay numbers in the CS Controller and each DEI correspond
to the System Board/Circuit information in Message Print. This CS Controller example only shows
two DEIs, but you can have up to four DEIs in a system (see Figure 7 on page 222 ). Table 36,
“System Board:Bay:Application Relationship in Message Print (CS Controller Example),” on
page 214 summarizes the system board/bay/application relationships between a MiVoice Office
250 and Message Print.
Figure 16: Line Jack Unit Assembly Wiring [European System]
For Single Line Phones
and Playback Devices
For Digital Telephones and
Single-Line Adapters
WH./BL
BL/WH
WH./BL
BL/WH
EARTH
Not used
5
3
1
6
4
2
1
2
3
6
5
4