Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Страница: 549 / 585

Phones
521
Message Lamp
85xx and 86xx phones have a Message Lamp located on the upper, right-hand corner of the phone.
This lamp is programmable and is defaulted to the Message feature code (365). If you change the
feature code associated with this lamp, it will flash when the feature is active. For example, if you
program the lamp for Individual Hold (336), the lamp will flash when a call is held at the phone.
Professional Display, Associate Display, and Basic digital telephones also have a Message Lamp,
but it is not programmable. Instead, it flashes whenever the MSG button flashes.
Speaker Buttons
On Executive, Professional, Standard, and Associate Display phones, and on digital telephones,
handsfree mode is controlled by a Speaker ( SPKR ) button. On 8500, 8520, and 8560 phones, an
illustration of a speaker ( ) represents the Speaker button.
Hold Buttons
On Executive, Professional, Standard, and Associate Display phones and on digital telephones, the
Hold feature is controlled by a Hold ( HOLD ) button. On 8500, 8520, and 8560 phones, an illustration
of a phone with the handset off-hook ( ) represents the Hold button.
Default Feature Buttons
When the system is in the default state, all phones are in the same keymap group and have the
feature buttons. Refer to the appropriate user guide for default feature button functions.
Secondary Extension Appearances
The Secondary Extension Appearances feature allows calls ringing or on individual hold at one
“primary” phone to appear on a “secondary extension key” at another phone. For example, a
secretary or assistant can have a secondary extension button for a supervisor’s phone, or one phone
can have several secondary extension buttons, each associated with a different primary phone. The
primary phone and the secondary phone must reside on the same node.
A secondary extension button functions as follows:
• When a call is ringing or holding on any CALL button at the primary phone, pressing the sec
-
ondary extension button will answer the call. The secondary extension can answer recalls,
transfers, callbacks, and hunt group calls.
• If the secondary extension button is unlit, pressing the button places an intercom call to the
primary phone. If the button is flashing, an intercom call can still be placed without answering
the incoming call by pressing the pound (#) button before the secondary extension button or by
manually dialing the primary phone’s extension number.
There are two programmable options that determine the type of call indications the phone user
receives for calls on a secondary extension button:
•
Ring When n Calls At Extension : Allows the phone to receive a burst of ringing when a specified
number (“n”) of calls queue-up at the associated primary phone. The ring signal repeats period -
ically as long as “n” number of calls are present at a primary phone. The Secondary Extension
Key Alerting Tone timer determines the interval at which the ring signal repeats. If “n” is set to