manualshive.com logo in svg

Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Mitel MIVOICE OFFICE 250 – это легкоразвертываемое и гибкое решение для бизнеса. Для установки и администрирования рекомендуется использовать руководство по установке и администрированию, которое можно бесплатно загрузить с нашего сайта. Обеспечьте стабильную работу своего бизнеса с Mitel MIVOICE OFFICE 250.

Поделиться
Скачать
background image

MiVoice Office 250 Installation and Administration Guide

322

•

Confirm System Manager connections and functionality, if applicable.

•

Confirm functionality of all peripherals connected to or dependent on the MiVoice Office 250.

•

Confirm that emergency numbers work. However, 

before

 conducting the tests, be sure to 

coordinate with appropriate local emergency response agencies.

New USB Upgrade Option

To support future upgrades (after v5.0 or later is installed) from a Universal Serial Bus (USB) storage 

device (such as a USB “flash” drive), a new USB option has been added to the AWP Upgrade page. 

Previously, only Trivial File Transfer Protocol (TFTP) upgrades were supported. When the USB 

option is selected, the TFTP form is hidden and the USB form is shown instead (and vice versa). 

Before using the USB option,

 

see “Important Considerations“ 

on 

page 322

.

The USB upgrade form has a single text box and a “Browse USB…” button. The text box can be 

used to manually enter a path to the USB storage device where the packages are located. 

Alternatively, clicking the browse button initiates a search of the selected USB drive for any packages 

that may exist, and then lists the versions available for installation. Upon selecting one of the versions, 

the text field is populated with the path.

Clicking the View Package Details buttons reloads the page and shows the current packages 

installed, available packages, and their versions. If a change is made to the upgrade location, clicking 

View Package Details or Upgrade Now saves the changes and then performs the selected action. 

If the upgrade location is changed while viewing package details, a message appears warning that 

the package details may need to be refreshed.

This USB upgrade option is available with both the Base Server and PS-1, but performing a USB 

upgrade applies only to the system where the USB drive is physically attached. This means that 

either two USB drives are needed (one with the Base Server packages and one with the PS-1 

packages) or one USB drive with both sets of packages will need to be transferred between systems. 

Making changes to the upgrade path location on either the Base Server or the PS-1 does not 

propagate the location to the other server.

Prior to v5.0, changes to the upgrade path location would not be allowed if DB Programming was 

connected to the system. The ability to change the TFTP server/port/path has been removed from 

DB Programming in v5.0, so this restriction is no longer be enforced.

Important Considerations

Please note the following when using a USB flash drive for software upgrades:
•

Leave the security key in place:

 If the system uses a USB security key instead of a serialized 

compact flash-type card, leave the USB security key in place and use another available USB 

port for the USB flash drive.

•

Use only one flash drive at a time:

 Besides the USB security key, the MiVoice Office 250 

supports only one USB “mount” at a time. So, for example, if you have a USB flash drive 

connected for database saves or backing up voice mail data, remove it before inserting the USB 

flash drive containing the upgrade software.

•

Wait ten seconds to swap flash drives:

 Because the MiVoice Office 250 supports only one 

USB mount at a time, you must allow adequate time for the system to unmount/mount devices 

Содержание MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MIVOICE OFFICE 250

Verizon One Talk CP965 User Manual preview
One Talk CP965
Бренд: Verizon Страницы: 69
Pentair SPACOMMAND CP3800 Series Installation And User Manual preview
SPACOMMAND CP3800 Series
Бренд: Pentair Страницы: 36
Cambridge Research Systems MR Confon Starter f MKII+ User Manual preview
MR Confon Starter f MKII+
Бренд: Cambridge Research Systems Страницы: 34
Alpine INE-W925R Quick Reference Manual preview
INE-W925R
Бренд: Alpine Страницы: 184
Cirrus Logic CS42516 Manual preview
CS42516
Бренд: Cirrus Logic Страницы: 90
PROEL BCH Manual preview
BCH
Бренд: PROEL Страницы: 28
Panasonic VoiceSonic KX-NT700 Operating Instructions Manual preview
VoiceSonic KX-NT700
Бренд: Panasonic Страницы: 80
Panasonic SA-MAX4000E Service Manual preview
SA-MAX4000E
Бренд: Panasonic Страницы: 31
Panasonic SA-MAX5000GM Service Manual preview
SA-MAX5000GM
Бренд: Panasonic Страницы: 40
Panasonic SA-EN37 Operating Instructions Manual preview
SA-EN37
Бренд: Panasonic Страницы: 8
Panasonic SA-EN35DB Operating Instructions Manual preview
SA-EN35DB
Бренд: Panasonic Страницы: 12
Panasonic SA-MAX670P Series Service Manual preview
SA-MAX670P Series
Бренд: Panasonic Страницы: 64
Panasonic SA-EN29 Operating Instructions Manual preview
SA-EN29
Бренд: Panasonic Страницы: 12
Panasonic SA-HC7 Operating Instructions Manual preview
SA-HC7
Бренд: Panasonic Страницы: 32
Panasonic SA-EN28P Service Manual preview
SA-EN28P
Бренд: Panasonic Страницы: 19
Panasonic SA-H82 Operating Instructions Manual preview
SA-H82
Бренд: Panasonic Страницы: 40
Panasonic SA-HD52 Operating Instructions Manual preview
SA-HD52
Бренд: Panasonic Страницы: 42
Panasonic SA-MAX5000PN Service Manual preview
SA-MAX5000PN
Бренд: Panasonic Страницы: 85

Бренды по названию

Популярные бренды

Загрузить еще бренды