Mitel MIVOICE OFFICE 250 Скачать руководство пользователя страница 46

Страница: 46 / 585

MiVoice Office 250 Installation and Administration Guide

5000 CP v6.0 SP3 New Features

This section briefly describes the new features, hardware, and enhancements available on the Mitel

5000 CP when equipped with the v6.0 SP3 software release.

There are no impacts to any of the 5000 CP documents or help files as a result of the following new

features in release 6.0 SP3.

Shellshock Security Updates

Shellshock is a family of security bugs in the widely used Unix Bash shell. The Shellshock

vulnerabilities affect various Unix-based systems and are used to execute command lines and

command scripts.

The 5000 CP v6.0 SP3 has included a series of fixes to prevent the Shellshock vulnerabilities from

affecting the system.

New 6.2.0.6 IP phone Firmware

5000 CP v6.0 SP3 introduces a new IP firmware version 6.2.0.6. The 53xx series IP Phones will be

upgraded to this version once the 5000 CP v6.0 SP3 is installed.

Mitel SIP DECT 6.0 support

In 5000 CP v6.0 SP3, the SIP DECT Version 6 offering is fully supported and validated.

Microsoft Exchange 2013 support for Unified Voice Mail

In 5000 CP v6.0 SP3, Microsoft Exchange 2013 is fully supported when using it in conjunction with

the Unified Voice Mail integration.

Содержание MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды

Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Бренды по названию

Популярные бренды