H3C XE 200 IP, Руководство по эксплуатации

Страница: 61 / 514

Operation Manual – Process Server Configuration
H3C XE 200/2000 IP PBX
Chapter 3 Gatekeeper Configuration
3-6
The default Q931 port of a gatekeeper is 1720.
II. Configuring the IRR response switch of the gatekeeper
H.323 gateways use Information Request Response (IRR) messages to provide status
information to their gatekeepers. You can enable or disable the gatekeeper to respond
to the IRR messages.
Perform the following configuration in PS-GK view.
Table 3-11 Configure the IRR response switch of the gatekeeper
Operation Command
Configure the IRR response switch of
the gatekeeper
response-irr { off | on }
By default, the IRR response switch is turned on.
III. Configuring IRR report interval
You can configure the interval in seconds at which gateways report status information
to their gatekeepers. If it is set to 0, no regular IRR report is required.
Perform the following configuration in PS-GK view.
Table 3-12 Configure the interval for IRR report
Operation Command
Configure the interval for IRR report irr-frequency irr-frequency-value
Restore the default interval at which
gateways report their state information
to the gatekeeper regularly.
undo irr-frequency
IRR report interval defaults to 60 seconds.
IV. Configuring the LRQ signaling processing method of the gatekeeper
The gatekeeper processes LRQ signaling by two methods:
z
LRQ terminated: The gatekeeper responds the LRQ signaling with an LCF
signaling, whose destination call signaling address is the call signaling address of
this gatekeeper.
z
LRQ forward: After receiving an LRQ signaling all of whose highest-priority called
gateways are office devices of the gatekeeper type, the gateway forwards it to one
of these devices.
Perform the following configuration in PS-GK view.