H3C XE 200 IP, Руководство по эксплуатации

Страница: 289 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 4 System Maintenance and Management
4-7
threshold is not permitted to be sent. A packet with a lower severity level is more urgent.
Severity level 1 means emergency and level 8 means debugging. When the threshold
is set to debugging, all information will be sent.
Table 4-8 Severity levels defined in syslog
Severity Meaning
emergencies The extremely emergent errors
alerts The errors that need to be corrected immediately
critical Critical errors
errors The errors that need to be concerned but not critical
warnings Warning, there might exist some kinds of errors
notifications The information should be concerned
informational Common prompt
debugging Debugging information
For example, to send IP module log information at warning and lower levels through the
SNMP channel, use the following command:
[XE] info-center source ip channel snmpagent log level warnings
IV. Defining contents of a channel
Perform the following configuration in system view.
Table 4-9 Define contents of a channel
Operation Command
Add records to a channel
info-center source { module-name | default }
{ channel { channel-number | channel-name } }
[ log { state { on | off } | level severity }* | trap
{ state { on | off } | level severity } * | debug
{ state { on | off } | level severity }* ]*
Remove records from a channel
undo info-center source { module-name |
default } { channel { channel-number |
channel-name }
The arguments are described as follows:
module-name : Module name.
default : Default records in channels.
level : Information severity level. The information at a level greater than severity is
prohibited to be sent.
channel-number : Specifies a channel by its number.