H3C XE 200 IP, Руководство по эксплуатации

Страница: 401 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 9 Password Call Service
9-1
Chapter 9 Password Call Service
9.1 Overview
9.1.1 Introduction to Password Call Service
To prevent illegal use of telephone sets, subscribers can set call passwords for their
telephone sets. Anyone who uses such a telephone set must first input the correct
password.
9.1.2 Using Password Call Service
I. Modifying call password
Two methods are available for call password modification.
z
The administrator can modify the password on the XE through command lines.
Refer to 9.2.1 “ Configuration Procedure ” for details.
z
The subscriber can modify the password on the telephone set as follows.
Table 9-1 Modify the password on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial
*541*ABCD*WXYZ*WXYZ#.
If the password call service is not enabled, the voice
prompt will say: “Sorry, you have not activated the
service.”
If the password call service is enabled and the
original password ABCD is correct, the subscriber
can hear the voice prompt “You have successfully
activated the service”, indicating the password is
modified successfully. If the subscriber hears “Sorry,
your attempt to activate the service was
unsuccessful”, indicating the modification fails.
ABCD stands for the original call password and
WXYZ for the new one.
The original password set for a subscriber is 1234.
The call password is made up of a combination of 0
to 9, A, B, C and D, not more than 8 digits.
Hang up the phone. —