H3C XE 200 IP, Руководство по эксплуатации

Страница: 195 / 514

Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 1 Number Substitution
1-11
Table 1-12 Create a substitute table
Operation Command
Create a substitute table number–substitute table- identifier
Delete the specified or all substitute
tables undo number–substitute { table-
identifier | all }
By default, no substitute table exists.
VI. Configuring/deleting substitute rules in substitute tables
The substitute rules, which are directly configured for devices, subscriber line numbers,
and static route numbers, take precedence over those in substitute tables. These rules
however can be the same.
Perform the following configuration in substitute table view.
Table 1-13 Configure/delete a substitute rule
Operation Command
Configure a rule in the substitute table
rule rule-tag { caller input-format
output-format [ callee input-format
output-format ] | callee input-format
output-format } { before | after }
Delete the specified or all rules from the
substitute table
undo rule { rule-tag | all }
By default, no substitute rule exists in the substitute table.
VII. Binding/unbinding substitute tables
You can bind a substitute table to the LS globally, to a gateway or office group, to a
static route number, or to a voice subscriber line.
Note:
You can bind a maximum of 16 substitute tables to the LS globally, eight to a device,
and two to a static route number or subscriber line. You can bind the same substitute
tables or different ones to both the LS and a device/static route number/subscriber line.
Perform the following configuration in LS, LS-GW, LS-OFFICEGROUP, prefix, or
subscriber view.