H3C XE 200 IP, Руководство по эксплуатации

Страница: 235 / 514

Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 2 Backup and Load Sharing
2-9
II. Configure the status information of office devices
In OFFICE-GROUP-PS backup configuration, the status of the office devices must be
set to “normal”.
Perform the following configuration in LS-OFFICEGROUP-OFFICE view.
Table 2-9 Configure the status information of office devices
Operation Command
Configure the status information of office
devices
device-status { forever | normal }
III. Configure the type of office devices
Perform the following configuration in LS-OFFICEGROUP-OFFICE view.
Table 2-10 Configure the type of office devices
Operation Command
Configure the type of office devices device-type { h323-gw | h323-gk | sip }
Note:
In OFFICE-GROUP-PS backup configuration, the type of the office devices must not be
“h323-gw”.
2.2 Load Sharing
2.2.1 Introduction to Load Sharing
In a large VoIP network constructed using the XE IP PBX, PS overload and network
load imbalance may occur due to the following reasons:
z
Difference of PSs in physical performance and network environment
z
Significant network structure changes, for example, addition of a large number of
gateways
To ensure healthy operation of the voice network, the XE IP PBX provides the load
sharing mechanism, allowing you to configure load distribution policies to dynamically
tune load distribution.