H3C XE 200 IP, Руководство по эксплуатации

Страница: 16 / 514

Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 2 Command Line Interface for Configuration
2-6
Step 1: If the PC and the XE IP PBX are located in the same LAN, connect the Ethernet
interfaces on them through the LAN, as shown in Figure 2-8 . Otherwise, connect the
PC to the XE IP PBX through the WAN, as shown in Figure 2-9 .
Telnet Client
PC
XE
LAN
Figure 2-8 Set up a Telnet configuration environment through the LAN
Telnet Client
LAN
PC
Router
XE
WA
N
WAN
Figure 2-9 Set up a remote Telnet configuration environment through the WAN
Step 2: Run the Telnet program on the PC and set its terminal type to VT100, as shown
in Figure 2-10 .