H3C XE 200 IP, Руководство по эксплуатации

Страница: 18 / 514

Operation Manual – Basic Configuration
H3C XE 200/2000 IP PBX
Chapter 2 Command Line Interface for Configuration
2-8
2.2 Command Line Interface
The system provides a wide range of configuration commands and the command line
interface (CLI) through which you can configure and manage the XE IP PBX. The CLI
supports:
z
Local configuration through the CONSOLE port.
z
Remote configuration through the AUX port.
z
Remote configuration through Telnet.
z
Management of the configurations of terminal users in user interface view.
z
Hierarchical command protection in which users can only execute the commands
commensurate with their levels.
z
Local, password, and AAA authentication modes that safeguard the XE IP PBX
against intrusion of unauthorized users and guarantee system security.
z
Easy access to on-line help by entering “?”.
z
Commands such as tracert and ping to provide quick network test.
z
Abundant debugging information for fault diagnosis.
z
The telnet client function that allows you to telnet from the XE IP PBX to other
devices for management.
z
FTP services that facilitate file upload and download.
z
Ability to execute a previously executed command.
z
Command line interpreter that provides multiple intelligent command parse
methods such as fuzzy match and context association for the convenience of
input.
Note:
You are not allowed to configure IDs or numbers that may conflict with command
keywords for XE IP PBX; otherwise, when any of the keywords including, without
limitation, active, all, allowable, callin, callout, config, h323, list, sip, subscriber and bind
is used, the system prompts error messages in the CLI.
2.2.1 Command Line View
The system commands implement the hierarchical protection model with four levels:
visit, monitor, system, and manage.
z
Visit: Includes network diagnosis commands such as ping and tracert , and the
commands for accessing external devices, such as telnet and rlogin . No
commands at this level can be used to save the configuration files.
z
Monitor: Provides the commands used for system maintenance and service fault
diagnosis, including the display and debugging commands. No commands at
this level can be used to save the configuration files.